InfoComm, Las Vegas, NV, June 6, 2018 – Focusrite (booth C857) is showing its RedNet X2P high-performance 2x2 Dante™ audio interface. Compact and robust, the RedNet X2P, features two Red Evolution mic pre’s, balanced line outputs and a stereo headphone amp. Housed in a compact form factor, X2P provides a high-performance remote I/O solution for Focusrite RedNet or other Dante audio-over-IP networks. X2P can be simply and quickly integrated into Dante™-enabled broadcast, post production and music workflows, since power, audio and remote control are supplied using a single Ethernet cable. For on-air productions requiring additional remote mic pre’s, X2P provides a quick, modular one cable solution.
The two digitally-controlled Red Evolution mic pre’s provide plenty of ultra-clean gain along with stereo linking, individualy selectable phantom power, a high-pass filter and phase reverse. Additionally, they include Air mode, emulating the sound of Focusrite’s classic transformer-based mic preamps. The RedNet X2P provides high-performance audio conversion with over 118dB dynamic range. These converters have been expertly selected and calibrated to provide the best balance of sound quality, dynamic range and conversion latency.
RedNet X2P features a “more me” control, allowing the talent to mix the level of the local mic pre inputs at zero latency with the cue mix feed to the unit via the network inputs assigned to feed either the local line outputs or headphone amp. The unit can be mounted directly to a mic stand, keeping it out of the way and within reach.
Flexible remote control enables local control of mic pre settings and output settings, or both to be locked. Artists can adjust their headphone mix and level, safe in the knowledge that they cannot accidentally adjust the mic pre gain.
Photo file 1: RedNet_X2P_front.jpg
Photo caption 1: Focusrite RedNet X2P 2x2 Dante™ audio interface.
Photo file 2: RedNet_X2P_slant.jpg
Photo caption 2: Focusrite RedNet X2P 2x2 Dante™ audio interface.
Photo file 3: RedNet_X2P_rear.jpg
Photo caption 3: Rear panel of the Focusrite RedNet X2P 2x2 Dante™ audio interface.
For further information, head to http://pro.focusrite.com or contact:
USA: Dan Hughley +1 (310) 322 5500 // firstname.lastname@example.org
Robert Clyne +1 (615) 662-1616 // email@example.com
About Focusrite Pro
Focusrite Audio Engineering has pioneered professional audio recording technology spanning almost three decades. Focusrite Pro, the company’s Professional and Commercial division, meets the demands of recording, post-production, live sound and broadcast professionals. It consists of RedNet, a fully modular audio-over-IP solution, and the Red range, Focusrite’s flagship multi-format interfaces, along with the heritage ISA range of microphone preamplifiers and analogue signal processors. Focusrite Pro products have been developed to meet the needs of the most demanding applications through a relentless focus on ease of use, quality and reliability. Focusrite is based in High Wycombe, Buckinghamshire, with offices in Los Angeles and Hong Kong.